geomembrane liner factory

Discussion in 'Getting started (how to install ELMA)' started by momu345, Jan 23, 2019.

  1. momu345

    momu345 New Member

    Geomembrane is a black, smooth, high quality, high density polyethylene liner produced from specialty formulated, virgin polyethylene resin. It contains approximately 97.5% polyethylene and 2.5% carbon black. It has outstanding chemical resistance, mechanical properties, environmental stress crack resistance, dimension stability.
    • Thickness: 0.20mm - 3.0mm.
    • Width: Within 8 m (1m-8m)
    • Length: 50m-100m/roll (as request)
    • Material: HDPE,( LDPE, LLDPE, PVC, EVA )
    • Color: Black , white , red , blue , or as required
    • Optional surface: Textued(one or two side) or smooth surface
    • Good physical and mechanic performance
    • High tearing resistance, strong deformation adaptability
    • Puncture-resisting, aging resisting, ultra-violet radiation, oil and salt, and corrosion resistance
    • Good adaptability to high and low temperature, non-toxicity, long service life
    • Good waterproof, drainage, anti-seepage and damp proof effects
    • Complete width and thickness specifications, low cost and easy installation
    • Environmental protection and sanitation like waste landfill, sewage treatment, industrial waste, etc
    • Water conservancy such as anti-seepage, leakage blockage and reinforcement of river, etc
    • Municipal projects such as underground project, subway, planting roof, etc
    • Landscape garden such as artificial river, bottom lining, damp-proof, etc
    • Mine industry such as bottom lining and anti-seepage
    • Traffic facilities such as road foundation and anti-seepage of subway and culvert
    • Agriculture such as anti-seepage of ditch, channel, reservoir, pool and irrigation systemgeomembrane liner factory